Tuesday, November 19, 2013

Smaller & brighter LED wash lights - the ProLight Intense lights the way

Not another wash light?

We had an interesting meeting last week with the company that supplies a lot of the LED Fixtures that we sell, the main purpose of the meeting was to show us the new 'Intense' wash lights that are headed for the UK.


LEDJ Intense 9P10 RGBAW LED Slim Par
It looks like some other 'compact' wash lights that are in the UK but this unit is different in that it has 5 colour LED's.

The case is finned to aid cooling because this unit has no fan to cool the LED driver (fins means that the case has a larger surface area so better cooling) so it will suit small studio spaces or even small theatres perhaps.

The LEDs are Red Green Blue Amber and White (hence RGBAW) so that you can mix some nice pastels by using the white element but then add the amber element to get a tungsten looking white. All of this under DMX control using 5, 7 or 9 channels so quite compact from a control point of view. In 9 channel mode there's a DMX channel that has preset colours too which means that if you need a light pink for your wash - you just send the unit a preset value.

It's a 25 degree beam so over a very short throw it's not going to do much, but over a 10 to 12 foot throw it's giving a beam something akin to a 500w Fresnel with perhaps 75% of the intensity. Obviously trying to pair it with a Fresnel would be a problem but running pairs of them would obviate the issue.

The unit is expected to sell for £183 (plus VAT) and won't be available until later this month. If you want to know more about the unit then have a look here - the manual is worth a download too. You should note that although the case looks chunky and durable (and it certainly feels chunky) despite appearances it is NOT IP rated so you couldn't rig it outside and leave it there in all weathers.

Intense Eye Candy

As well as the rather nifty looking washlight above, there's also an effects version of the intense - more often referred to as 'eye candy' - intended for situations where the units will be visible to an audience e.g rigged as backlights or side washes.



LEDJ Intense 19T3 RGB LED Slim Par
The 19T3 unit has simpler 3 colour units giving only RGB mixes of colour, but the case is the same which means no fan for quieter rigs. This unit has even more options for DMX control - having 3,6,9 or 11 channels of control. In the 11 channel mode you can address the outer, middle and centre rings of the fixture individually for eye catching rainbow effects.

Because it's a more densely packed fixture (from the LED point of view) it has a wider beam angle so may be slightly more useful if having a decent 'true' white isn't essential for you.

There's more info on it here and again the price isn't that expensive - £166 (plus VAT) and again there should be stock available at the end of the month.

Intense White

To complete the Intense family there's a third unit which has two colour LED's to give Cool White and Warm White colour mixing - for situations where you want coverage, low energy use but colour isn't essential.

LEDJ Intense 12D4 CW/WW LED Slim Par

Again, it has the same finned cast housing for convection cooling, so it's going to run cool most of the time. Because the unit uses two colour LED's they're not as densely packed as in the 19T3 but the separation helps the beam angle - 29 degrees. DMX control is simpler being either 2 channels or 4 channels - 2 channel mode gives control over the cool & warm elements of the LEDs so that you can mix your own colour temperature whereas 4 channel mode gives a channel for preset colour temperatures.

In keeping with the rest of the range the cost is low - £141 (plus VAT) and as with it's "brother" units there will be stock around the end of this month. For more details (and to grab the manual) have a look here.